Standard Models & 1:1 Customization for Chillers and HVAC Equipment
Industrial chillers are fundamental components in large-scale HVAC setups, district cooling grids, data centers, and manufacturing processes. While they provide essential thermal regulation, their mechanical operations inherently generate significant dynamic forces. Centrifugal, screw, scroll, and reciprocating compressors, along with high-velocity water pumps and condenser fans, act as powerful sources of low-frequency vibration. Without the implementation of specialized industrial vibration isolators for chillers, these mechanical forces propagate through building structures, leading to substantial structural noise, piping fatigue, and premature component failure.
Chiller vibration is not merely a noise nuisance; it is a complex engineering challenge. When a chiller operates, its rotational components create dynamic unbalanced forces. These forces occur at specific frequencies related to the motor's operating speed (often 2900 or 1450 RPM in 50Hz regions, translating to roughly 48Hz or 24Hz excitation frequencies). If these frequencies align with the natural frequency of the supporting structure or building floor, resonance occurs, amplifying the vibrations exponentially.
To prevent this, engineers utilize vibration isolators to introduce a flexible element between the chiller frame and the building structure. The objective is to design an isolation system where the natural frequency of the isolator is significantly lower than the disturbing frequency of the chiller. A ratio of at least 3:1 (disturbing frequency to natural frequency) is standard, which yields an isolation efficiency of approximately 88% to 99%. High-performance spring mounts, with static deflections ranging from 1 to 3 inches, are often required to achieve the low natural frequencies (typically 1.5Hz to 5Hz) necessary to isolate these critical low-frequency vibrations.
While simple elastomeric pads are cost-effective and suitable for high-frequency noise isolation, they lack the static deflection capacity required for heavy chillers. A typical 500-ton centrifugal chiller can weigh upwards of 30,000 lbs. Under such loads, rubber pads compress completely, losing their elasticity and failing to isolate low-frequency vibrations. Open-spring or restrained spring mounts are essential to provide the necessary travel and compliance to handle both static weight and dynamic operational loads.
Over 1000+ Successful Deployments Across Critical Environments
Bellking Vibration Reduction Equipment Manufacturing (Kunshan) Co.,Ltd
Founded in 2013, we are a high-tech enterprise based in Kunshan, China, specializing in comprehensive vibration control solutions. We design, manufacture, and supply advanced vibration isolators—including pneumatic, spring, and rubber types—for precision machinery, semiconductors, HVAC systems, and industrial equipment. With over 10 patents, ISO 9001 certification, and custom engineering capabilities, we deliver reliable, high-performance products to ensure operational stability.

Over 10 R&D professionals, 37 patents, high-tech certified.

2,000 ㎡ production base, 100,000 pcs annual capacity.

Air springs, spring mounts, rubber mounts, inert bases, anti-vibration platforms.

ISO9001, Dacromet coating (900hrs salt spray), 99% isolation efficiency.
The global demand for industrial vibration isolators has surged due to urbanization, stricter environmental noise regulations, and the expansion of high-density infrastructure. Data centers, hospitals, high-tech manufacturing cleanrooms, and premium commercial offices now mandate strict vibration limits. For instance, in data centers, excessive structural vibration can lead to server hard drive read/write errors or physical degradation of delicate fiber optic connectors. Consequently, the specification of chiller vibration isolators is no longer an afterthought but a critical phase of structural and mechanical engineering.
Depending on the installation location and the building's structural stiffness, different vibration isolation strategies must be deployed:
1. Rooftop Chiller Installations: Rooftops are typically constructed of concrete over metal decks, which are inherently flexible. When a heavy chiller is placed on a flexible roof, the static deflection of the roof structure must be considered. In these scenarios, vibration isolators with 2-inch (50mm) or 3-inch (75mm) static deflection are required to ensure the isolator remains softer than the roof structure. Additionally, wind-restrained springs are vital to prevent the chiller from moving or tipping during high-wind events.
2. Basement and Grade-Level Mechanical Rooms: On-grade concrete slabs are highly rigid, meaning structure-borne noise is less likely to cause structural resonance. However, high-frequency noise can still travel through the floor and piping. In these installations, spring mounts with 1-inch (25mm) deflection combined with neoprene acoustic pads are typically sufficient. Inertia bases filled with concrete are also widely used here to add mass, lower the center of gravity, and limit the physical movement of the chiller during start-up cycles.
Expert in Shock Absorbers | Premium Quality & ISO Certified Performance
Natural frequency: 3–5Hz at low frequency. Vibration isolation efficiency up to 99%, transmissibility as low as 1%. Effectively reduces equipment noise. Precision air-mount isolators feature a natural frequency as low as 1.7Hz.
Our shock absorbers feature Dacromet surface treatment. They pass 900-hour salt spray testing, offering excellent corrosion resistance, durability, and stability suitable for harsh working conditions.
Under normal operating conditions, spring and transformer isolators deliver efficient performance for over 15 years, while air-mount isolators have a service life of more than 6 years.
Unlike inferior market springs prone to fracture and fatigue, Bellking selects high-quality springs under strict inspection standards to consistently provide premium spring, transformer, and pneumatic isolators.
To prevent equipment from emitting toxic gases or failing environmental codes, Bellking adheres to green production processes. The entire production chain is fully compliant with international environmental standards.
Professionally tested, Bellking shock absorbers can withstand 3–5G acceleration impact. Our unique anti-shock structure effectively prevents damage and safety hazards under sudden impact conditions.
Providing End-to-End Solutions from Design to After-Sales Support

- Boasting a 2,000 ㎡ production base, equipped with robotic welders, automatic spraying systems, CNC machining centers, and other numerical control equipment.
- All products are ISO 9001 certified. Standard models are available for 24-hour shipment, ensuring on-time project delivery.
- Equipped with salt spray test machines, tension/compression testers, US AI vibration spectrum analyzers, and other testing equipment. Factory inspection reports and third-party test reports are available for all finished products.
Collaborating with Global Brands to Deliver Reliable Vibration Control










Over 13 Years of Expertise in Equipment Vibration Solutions
High-Performance Solutions Built to Withstand Heavy Industrial Loads